AKORD 12mm x 12m Water White Plumbers PTFE Thread Seal Tape Plumbing Joint, 12mm x 0.075mm

Product Information

A few wraps of thread sealant tape is all it takes to make a leak-free connection! If you follow these steps, you’ll find that Teflon tape is a breeze to use and does its job well. You can also use plumber’s tape to fix leaky connections between water lines and sinks. Shut off the water supply, place a container under the water lines to catch any water in them, and disconnect the lines. Remove any old plumber’s tape and wrap the threads tightly 2-3 times with new plumber’s tape. Reconnect everything and turn on the water supply, then test the faucet. Of course, there are more uses to Teflon tape than just sealing pipe threads, and it goes by many names, too. What is Teflon Tape?

We have had, over the years, individuals and even some professionals comment that PTFE tape can also be wrapped around olives in compression joints as this will help to create a water tight seal. This is ceratainly not the case at all and one that we have confirmed with pretty much all the major PTFE tape manufacturers. How Much PTFE Tape Should you use? Clean all threads: The first task is to clean everything fully and remove any dust, debris or grime that may be in any of the threads. The presence of even the tiniest spec of dust can cause a leak. Using a clean, lint-free wrag dust off any debris from in and around the threads of both sections of the joint. Where any heavy soiling is present you may need to use a specialist cleaning or degreasing product. The best tool to use is a wire brush or if you have one, like we have used here, a brass wire brush. Save frustration and embarrassment with our guide on the best toilet plunger you can buy. We will even show you how professionals unclog toilets!

Where Should PTFE Tape be Used?

For plumbers, PTFE tape is essential when sealing up pipe threads before making connections. But, thanks to its many properties, there are many professional and casual uses for it.

Cut off the excess tape on the remaining exposed threads at connections that you can see. This will keep your work looking extra-professional at shower head connections or exposed plumbing underneath pedestal sinks. Conclusion Chemical inert, so it won’t react with other elements. That makes it ideal for applications where solvents, gases, or acids may be lurking. As prevention is certainly better than cure in this case, for any plumbing joints that are hidden or hard to reach such as those being kitchen units, it’s not a bad idea to add some PTFE tape to ensure no leaks occur at any point in the future as in most cases you’ll never find a leaking joint until the damage has already been done. Other names for Teflon tape include plumber’s tape, PTFE tape, pipe tape, or thread tape. All of these names refer to the same thing, which is most widely known as “Teflon” tape.PTFE tape, thread seal tape, plumber’s tape or Teflon tape as it’s also known is a very usefully and versatile tape used mainly to help seal up plumbing joints and stop or prevent them from leaking. As a product Plumbers Mate is more suited to preventing leaks in and around fixed objects rather than sealing up actual plumbing fittings. Don’t use any more than 3 layers of PTFE tape on a given joint as this can cause leaks Which way do you Wrap PTFE Tape on a Joint? Keep the first two threads of pipe free of any PTFE tape. This will allow the pipe to engage the fitting and easily start your connection. Take the end of your plumber’s tape and place it on the second thread from the pipe’s end. Hold it there with your finger or thumb. The tape should sit flat over the threads and not bunch up. Extend it perpendicularly to the length of the pipe.

A continually running toilet can cost you hundreds of dollars on your next water bill. Learn how to diagnose and fix a running toilet and save money! Piping systems and additional piping that use oxygen need a specialized thread tape for their sensitive system. Therefore, a thread sealant was developed in green tape for these specialty plumbing lines. Of course, if you’re ever in doubt about how to apply it or what kind you should be using, consider reaching out to a professional to answer your questions. They’ll make sure the job is done right so you don’t have to deal with the headache of a leak down the road. Applying Teflon tape may seem simple enough, but since it has no adhesive properties, you have to make sure you wrap it in the right direction and in the right spot or you could end up with a balled-up mess. Here the steps to follow to wrap PTFE tape properly and get a leak-free seal. Create a tight seal between water lines and sinks with plumber’s tape. Wrap plumber’s tape 2-3 times around the male threads of all the fittings underneath a newly-installed sink before you attach the water lines. This will ensure a tight seal so there aren’t any leaks when you’re running water from the faucet at high pressure. [6] X Research sourceAfter you are done wrapping your thread sealant tape you can use a fingernail or the edge of the spool to chase the threads and flatten the tape. This will prevent any bunching or binding when you tighten up the pipe. Screw joints together: Run your finger over the loose end of the PTFE tape and push it down into the threads to prevent it coming out when you start screwing the joint up. With the tape fully secured you can at this point apply a little jointing compound if you wish to fully hold the tape down and also add an additional layer of leak prevention. Gently screw the joint up taking care not to loosen the tape until the joint is screwed up hand tight and then pinch it up using a spanner (don’t over tighten as this can cause the joint to fail) Aside from its common use as a sealant for water-based plumbing applications, PTFE tape can also be used for gas and fuel oils. Keep tension on the tape, ensuring that it is snugly wrapped around the pipe. As you overlap the tape, work gradually away from the end of the pipe to completely cover the threads.

Although it may seem that you can use PTFE sealant tape with pretty much any water, fuel or gas system, this isn’t quite the case however as pretty much all compression fitting manufacturers recommend it should not be used on any form of compression joint. With a compression joint, the watertight seal is created when the compression nut is tightened down. Introducing a substance such as PTFE tape into this can actually in some cases cause create leaks!

In this DIY guide we take a look at PTFE tape and find out how exactly how to use it correctly. What is PTFE or Sealant Tape When wrapping PTFE tape around a thread each revolution or layer should over lap the last one by roughly a half to ensure a good seal. Thanks to its unique construction, when used properly, Teflon tape can prevent plumbing leaks by filling the threads of pipe connections. Without it, you could end up with a mess on your hands.