Tefal High Pressure Steam Generator Iron, Pro Express Care,  2400 W, Black/Blue, GV9071

Product Information

The water may also have condensed in the pipes because you are using steam for the first time or you have not used it for some time. In which case hold the iron away from the ironing board and press the steam control button until it produces steam. With 7.5 bars of pressure and a steam boost of up to 500g/min, it’s one of Tefals most powerful high pressure steam generators If you experience this sort of problem, we suggest you try using untreated tap water or bottled water. The best of steam power for ultimate results. New high pressure boiler technology provides perfect results at professional standards. Shiny marks can appear on some fabrics, especially on dark coloured fabrics. We would advise ironing dark clothes inside out and using the correct temperature.

Tefal Pro Express Care GV9071 - Qualityreview Tefal Pro Express Care GV9071 - Qualityreview

After rinsing the boiler, you need to press and hold the restart button for about 3 seconds to stop the light flashing. Steam escapes from the anti-scale Valve Plug.Up to 7.5 bars of high pressure steam, plus 500g/min steam boost for efficient and outstanding results Smart Technology gives you precise ironing results at the touch of a button. There are no complicated controls; just five preset ironing levels –‘synthetics’, ‘silk’, ‘wool’, ‘cotton’ and ‘linen’– ensure the optimal balance of temperature and steam for each fabric. The internal parts may make metallic noises with the change in temperature. There is nothing wrong with it. Is it normal to hear a rattling noise from time to time? Protect System prevents stains, while Scale Collector collects 10 x more scale** for long-lasting steam power

Tefal GV9071 Pro Express Care Steam Generator Iron Tefal GV9071 Pro Express Care Steam Generator Iron

Double protection*: Spiral Protect anti-drip system prevents stains & removable Scale Collector captures more particles for effortless crease removal Place the iron's temperature control to the type of fabric to be ironed and set the steam output to match (If the setting temperature control is on Synthetics, the setting steam control must be on MIN). Some waterdrops drip out onto the floor during ironing. Your iron is too hot, see our recommendations on temperature control settings in your product manual. After that I started using deionised water but unfortunately this did not help. After a couple of ironing hours it will leak and of course this will happen at the worst time and on your favorite clothe.The Tefal 2-year guarantee covers domestic and private use only. For all other uses, it is limited to the 1-year Commercial guarantee. To see the guarantee conditions for your product, select one of the product ranges below. How do I get my electrical product repaired when it is under guarantee? If your red water light is flashing there is no water in the water tank or the tank is not fully or firmly pushed down. Why does my generator seem to be leaking? Over-use of the turbo steam function can cool down the iron soleplate. In this case stop using the turbo steam function and allow the iron temperature control light to come on and go off again before using this function again. Before any maintenance, make sure that the appliance is unplugged and that the soleplate, boiler and iron rest have cooled down (at least 2 hours after ironing).