About this deal
Fully certified for use in the UK, Europe and the United states of America (USA), CE Marked and supplied with an EC Declaration of conformity / Operation and user manual. While in its loaded position, do not obstruct the Remote load release device so as to prevent its body being aligned straight with the line of load. Misalignment may prevent the movable jaw from releasing the connected member even with the device in the released position.
The Hook-Clamp can release the load with or without load on the unit. (providing the safety hitch pin is removed). It is important to test the effort frequently after some material has been removed so as to prevent the removal of too much material. Sub-Sea use, made completely from aerospace-gradestainless steel the HookClamp has the ultimate in corrosion resistance.Safe working loads / Capacities range from 590kg to 69,000kg though special bespoke HookClamps are available on request, (we have designed and made units up to 250 tonne though greater capacities can be made on request) Ideal for use in the water utilities industry to automatically place pumps into sumps or wet wells.
To prevent the need to work at height, enabling the load to be disconnected from distance with-out the need to climb onto the load. The Hook-Clamp consists of several moving parts that allow the 'jaw' to open and release a load, generally you would use a release line to attach to the lever, pull this line and the load will release. Alternative Methods of ReleaseManual release of the loaded Hook-Clamp is activated by first removing the safety / hitch pin. This is done either manually (directly by hand) or by a pull cord attached to the spring loaded safety hitch pin; i.e. remotely and safety from a distance. The safety hitch pin release cord can be activated from any direction.