Hilltop Products Ltd Heat Shrink Tubing Kit - 50 Clear Tube Sleeving pack

Product Information

Note 5:When cutting heat shrink tubing and wrap around sleeves to the desired length special care has to be taken to ensure smoothly cut ends. Poorly cut and irregular edges can cause heat shrink tubing and sleeves to split during shrinkage. Heat shrink tubings do not shrink only in diameter, but generally also in length. This change in length after shrinking is indicated in a percentage Heat shrink tubingwith a shrink ratio of 2:1 offers: HFT-A, TL27, TF21, TF24, VITON-E, TK20, TK29, TFE-2, TR27, TCN20 and SE28. The shrink ratio indicates the rate, the product shrinks (supplied diameter in relation to recovered diameter). The shrink ratio varies from 2:1 to 6:1. The higher the shrink ratio, the more varying diameters of the object can be covered. Thus, fewer sizes of heat shrink tubings are needed.

In our application overview for heat shrink tubings you will find the recommended heat shrink tubing size for every cable diameter.

When selecting the correct heat shrink tubing it is important to consider the following parameters:

Identification and colour coding:Heat shrink tubing is available in various colours, allowing for easy identification and colour coding of different wires or cables. Every single piece of heat shrink tubing has to match its specific area of work to the highest degree of accuracy – from batch production, for example as the insulating handles of tools, to heat shrink tubing sleeves for maintaining underground cables which have already been laid and which would be extremely expensive to repair in terms of resources and costs without using corresponding specialised heat shrink tubing (heat shrink cable repair sleeves). RMSare heat shrinkable wrap-around sleeves used in cable repair and splicing applications.The wrap around sleeves are a fast, labour saving and permanent cable repair and sealing system. The sleeve is simply wrapped around the cable and held in place using a rail and channel closure. This means HellermannTyton sets the pace with each new piece of heatshrinkable tubing when it comes to providing protection against mechanical, environmental, chemical or electrical effects.

According to the requirements set, the shrink ratio, that is to say the precise size to which heat shrink tubing is capable of shrinking, can be just as important in this process as dispensing with halogeneous materials in the manufacturing of heat shrink tubing. The 80-20 rule means that a heat shrink tube should shrink by a maximum of 80% and a minimum of 20%. Polyvinyl Chloride (PVC): PVC heat shrink tubing is known for its flexibility, durability, and flame-retardant properties. It is commonly used in applications where resistance to oils, fuels, and chemicals.Polyolefin (PO):Polyolefin tubing is the most widely used and versatile type of heat shrink tubing. Organization and bundling:It can be used to group and organize wires or cables, making installations neater and more manageable. Heat Shrink Connectors https://uk.rs-online.com/web/c/connectors/wire-terminals-splices/splice-connectors/ Heating by a torch will shrink the heat shrink sleeve and melt the adhesive inner coating resulting in a moisture-proof, insulating and tight-fitting repair. Heat shrink tubing should shrink by at least 20% and not more than 80% of the supplied diameter to achieve the optimal result.