Fireangel CO-9B Carbon Monoxide Alarm, Kitemark Approved, 7 Year Life, White, 1 pack

Product Information

CO detectors should be installed near potential sources of carbon monoxide, essentially any fuel-burning appliances such as boilers, cookers and ovens, fireplaces (both open and enclosed burners), and portable generators. As you are likely to be most affected by CO in areas of your home that you spend the most time in it is advisable to install alarms in those areas as well, such as the living room and bedrooms. It is also worth noting that while one detector is better than no detectors at all, larger homes may require several detectors to cover the property fully. An audible Carbon Monoxide detector is the only way to be alerted to a carbon monoxide leak; it can’t be smelt, tasted or seen so it’s impossible for human senses to detect. The alarm’s high sensitivity mode will be enabled if the alarm predicts CO levels will increase to or above 180ppm for fast reaction to rising CO levels.

To activate your CO alarm, pull the disabling tab out of the alarm and wait up to 1 minute for the green LED to flash to confirm the alarm is active. After 1 minute, press the test button to hear the alarm sound. Please note, the alarm will not sound before the 1 minute activation period is complete. CO alarms and rental properties Simple testing, quieter volume. Residents have convenience of the quiet self-test function for regular, discreet testing at a reduced noise level. Discover more. How many CO alarms are needed for a property?Experience both audible and visual safety warnings with the digital screen, which will change colour to indicate different incident types for clear safety advice. Battery powered carbon monoxide alarms can typically be installed wall-mounted or left free-standing on flat, level surface.

If you live in Scotland find out more about the law in your area on our blog post here. (link to homeowner Scottish regulations blog) With a multi-functional LCD digital display and array of exclusive features such as Alarm Memory, Ventilate Instruction, Quiet Self Test and Environmental Sensing, the FA3322X4 offers the highest level of CO detection for your home. To activate a new CO alarm, pull the disabling tab out of the device and wait up to 1 minute for the green LED to flash to confirm the alarm is active. For the FA3328 only; activate the device by Find out more about what you should expect from your landlord for CO safety in your home. Get protected today

We derive satisfaction from creating fire safety products of extraordinary calibre, guaranteeing the continuation of our esteemed tradition of customer service excellence for the years ahead. If you have had your FireAngel carbon monoxide alarm for a few years but it is still within warranty, and the isolation pin has been removed, please get in touch with our Customer Support team. If it is not within warranty, please replace your alarm as soon as possible. Why is my FireAngel CO alarm beeping?

FireAngel recommend a CO alarm is installed between 1 m and 3 m away from each fuel‑burning appliance, as well as installing additional units in areas such as living rooms and bedrooms where you spend most time whilst at home. Activating your new FireAngel CO alarm Also note that carbon monoxide has been proven to spread into neighbouring properties through open windows and, in semi-detached or terrace houses, through loft spaces. If your property has an attached garage with a connecting door through to the house, it is recommended to fit a CO alarm inside the house leading from that doorway. Near an appliance: they should be placed within 1 to 3 metres horizontally from the appliance and between the height of the appliance to 150mm below the ceiling – i.e., not above a stove where it would be in the path of steam or fumes. FireAngel’s new range of carbon monoxide alarms use intelligent sensing technology for a rapid reaction to rising levels of CO.

Carbon Monoxide Poisoning

Invest in the safety of your loved ones and the tranquillity of your home with our advanced carbon monoxide sensor. With its cutting-edge technology and unmatched reliability, you can rest easy knowing that early detection and alerts are just a heartbeat away. Easy to use with a large test and reset button, the Fire Angel Co-9B carbon monoxide detector measures three different levels of CO molecules: Low, High and Crisis.