DYLON Washing Machine Fabric Dye Pod for Clothes & Soft Furnishings, 350g – Olive Green

Product Information

You can use this chart and list to plan out what color your overdye bath should be. Do keep in mind that results can’t be guaranteed and that different fiber contents and fabric types can impact the outcome of a dye project. The list below anticipates that one of your ingredients is the fabric and one is the dye bath – it doesn’t matter which is which. In natural dyeing, Overdyeing is used to create colors with dyes that might interact badly with each other if they were mixed directly, and it’s also used to update colors that fade over time. Is it easy to overdye fabric and clothes?

Beige – almost any “antiqued” version of a color can be created from a beige base. Neons are unlikely, but you can use a dusty pink using a bit of red dye, a mossy green using some spring green dye, etc. Beige is similar to mixing a very light brown, it will tone down any dye color slightly and make it appear slightly muddy and less intense. Place damp, unfolded fabric into the washing machine drum. Always start with clean fabric (wash thoroughly, even if new, to remove stains or any finishes that cannot be seen). For best results read full instructions and helpful hints before starting. The shade you will achieve depends on 3 things: Overdye” is the word dyers use to describe layering dye baths on top of each other. This could mean that you use multiple dye baths one after another to build a depth of color, but it could also mean dying an existing non-white garment to a new color. Aside from adding depth, texture, and new tones, it’s also an incredibly useful way to breathe new life into old garments, disguise stains, and update garments to a color you’ll actually wear.Should any dye remain in the machine, run another empty cycle with detergent and a cup of household bleach in the drum. In other cases – like an old high school t-shirt or hoodie – the printing is done using screen printing ink which (in most cases) has a polymer base and sits on the surface of the shirt. This ink can sometimes absorb polyester dyes, but it won’t absorb dyes meant for cotton, silk, or wool. This means that if you overdye a yellow shirt with a red print on it in blue dye, the result will be a green shirt with the same red print. As with any overdye project, if you’re aiming for a particular color on a garment like this, it’s always best to test first! Although a dye may not absorb into a polymer-based ink, it may lightly stain the ink enough to be noticeable. Tips for overdyeing t-shirts, hoodies, and jeans: Ideal for changing or updating the colour of your clothing or soft furnishings in the washing machine This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office. How To Return A Product

First, you’ll want to pay attention to fiber content. A cotton shirt that is made using a polyester thread will result in dye being absorbed differently. It’s likely that the polyester thread will retain the original color while the fabric itself absorbs the dye. Hoodies and t-shirts often have prints on them (we discussed this in the patterned fabric section above) so it’s best to test in an inconspicuous area to determine how the fabric, print, and dye is likely to interact. Red + blue creates a purple end result (for example, a red shirt with blue dye, or blue pants with red dye) If you wish to return your item to Robert Dyas, you can do so by one of the following methods: 1. Request a Collection via Robert Dyas Customer Services White – the opportunities are endless! Dye white fabric any color you want and it’ll come out the same color as the dye says it will, which is quite handy! You probably learned something about color mixing in school – red and blue make purple, yellow and blue make green, and the difference between primary and secondary colors. Dyes, like paints, are composed of pigments, and overdyeing is essentially just mixing pigments, the same way you’d mix paint.When cycle is complete, remove the empty pod from the machine. Add washing detergent and run another cycle (same washing settings as the first). Once you’ve selected your overdye bath color using the above sections as a reference, the dyeing process will depend on the type of dye you want to use, and the type of fabric your garment is made from. We’ve created some resources that encompass how to dye with box dyes like Rit, Dylon, and iDye as well as specialist dyes like fiber reactive dyes and acid dyes. You can find more information on how to have a successful dye day in these posts: