FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen

Product Information

The QQ series are very user friendly out of the box, are 90% preassembled, yet will produce quality to match any other unit in this price band. The basis of 3D printing a part or functional prototype using FLSUN QQ-S Pro FDM 3D printing technology! The printer is equipped with a touchscreen and Wi-fi connection. It can resume printing from the same condition where you had to stop because of the power cut off.

Resume printing function：Don’t worry about power outages, when the power is restored, the printer will continue to print from the interruption point. One carriage doesn't move or doesn't always move right. Tighten them. # Nozzle is higher in the middle vs. the sides (or vice versa) Once you are done with that, install the SD card or connect to the 3D printer using a USB cord and install the sliced file that contains the geometry of the part or functional prototype that you wish to 3D print in G or GCODES so it is fed to the 3D printer. Next, we tried a larger Pokemon model, of a Venonat. This took around 2 hours, and came out looking crisp and well defined, even in the antennae and top spikes which are printed vertically with no supports. There were small amounts of stringing but this is to be expected in this situation. We printed it with supports, but turned on its side the model could probably have been smoother. Again, this does not reflect on the FLSUN QQ-S, but on our haste.

Security

So when these printers are sent out , they are not tuned in to a perfect frequency , I have run some baseline tests around 60Hz +/- 2 hz But, for the extra print speed at up to 200mm/s, and generally improved quality, I think it’s well worth it. As you're introducing a couple of new layers the bed temperature may need to be adjusted. # Silent stepper drivers easy cheap Large Printing Size Φ255*360mm: Support various 1.75mm diameter printing filaments like PLA,etc. Widely used in toy, architecture, furniture, education, medical, daily necessities and other fields. But just about any extuder will to that fits to a NEMA17 face plate! # Alternate extruder mountings

You should always use two wrenches or pliers: one to hold the stationary part, one to hold the part you're unscrewing The standard test of any good 3D printer, we printed a 3DBenchy with zero supports. The result was an almost perfect Benchy — barely any imperfections even in the overhangs to create the inside part. Very impressive from the FLSUN QQ-S 3D printer. It’s fast, making it ideal if you print a lot of models, and don’t want to lose print quality by speeding things up too much. It’s larger and faster than the Q5, but still reasonably priced. Though, it’s not as fast as the SR or V400. This way, all the microcontroller has to handle are the movement commands (ex. move stepper_a 10 steps) as well as heating commands (ex. heat extruder to 200 degrees). This results in a much smoother operation of the printer.The Flsun Q5 is a well-rounded, accessible machine ideal for beginners on a budget that can speedily print simple projects. When reassembling, first assemble loosely, then push the bowden tube all the way in, then heat and tighten last bit

Bit motherboard: New upgrade controller and program, with independent MOS module, more stable and durable, keep the printer high speed printing.Support online or TF card offline printing. Support WiFi remote control. This allows the bowden tube to be less than 12" (30cm) long. # Optical Endstops # QQ-S (Pro) easy cheap

The touchscreen interface will let you operate and control most of the functions that you can do on FLSUN QQ-S Pro, like pre-heat, move, print, extrude, level, set some of the aspects of this 3D printer, and a lot more. Setup

The Flsun Super Racer (SR for short) lives up to its name by being one of the fastest FDM printers around. At 200mm/s, you won’t be kept waiting around for long until your projects are ready. The QQ design also offers a larger print area than most, specified as 255mm x 255mm (for most designs you can use the full 265mm of the bed). Tall and large: this thing stands at not far from a meter tall! Therefore, if you’re looking for a compact, small 3D printer that can fit quietly and neatly on the side of a desktop, look elsewhere. You should always fine tune your settings depending on the spool of filament you're working with! # Priming the hotend printing is definitely growing in popularity and as a result we’re seeing plenty of manufacturers getting into the development of 3D printers. FLSUN has recently released their new QQ-S Pro model, an updated version of its successful line that includes many amazing features for both home users or professionals alike!Comes with pre-installed models on a microSD card for those who want to get going straight away and don’t have a laptop handy with Cura. since they have not done this. Please ask them to publish the QQ-S source code! # Sources # FLSUN Q5 You need to fit that filament in the filament spool that’s present on the head of this 3D printer. The printing process actively starts after loading the 3D printer filament. Using manual Move in Z direction on the SR UI , move the hotend up and down therefore using the newly tuned belts Large enough to handle some decently sized projects, and fast enough so as not to keep you waiting, the Q5 is a good choice for anyone who wants a good, high-quality FDM printer. When to Buy the Flsun Q5