Upgraded NanoVNA-H4 Vector Network Analyzer, SeeSii Latest V4.3 10KHz-1.5GHz HF VHF UHF 4" Touch Screen Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

Product Information

For example, it shows ">DFU" option under CONFIG and of course the NanoVNA_H4 does not use this method to enter DFU mode. Hugen’s NanoVNA-H improved NanoVNA with a 5V DC-DC boost converter, which enables stable operation driven solely by a 3. DFU mode is replaced by "Brightness" and I remember to have seen DFU mode passing by, but can't find it back now, please how to entyer DFU mode, I tried a long press af the swith, but no luck.

NanoVNASaver is a software that allows you to interface with the NanoVNA-H4 Vector Network Analyzer and conveniently manage the measurements and data on a computer. A valid product review is one where you have personal experience or knowledge of the product that you would like to share with others. Read the SWR measurement: The SWR chart is displayed in the software, with the frequency range on the horizontal axis and the SWR values on the vertical axis.Below 300, I still like the original NanoVNA because it is faster, and much more capable of making narrow band measurements. The case fit-up around the SD socket is poor, it is very easy to drop the SD card inside the case, and quite inconvenient to extract it. Reviews of equipment capable of CB/Freeband operation or not FCC Certified/Type Accepted may be removed.

Since no additional STM32F303 functions are used on the NanoVNA-H4, the STM32F302 and STM303 use on the NanoVNA-H4 are identical. Using my Agilent 70dB step attenuator (dc-4GHz) the NanoVNA-H4 hit its measure limit at -50dB in the 1 - 1. Offering rewards for good reviews can create detectable bias in reviews that savvy review readers can notice.

I took reading with my RigExpert on HF and compared then to the Nano and they were extremely close to the same readings on both. The measurement setup was relatively primitive, I just put the tinyDMTD on my lab bench, connected it to my laptop via the supplied USB cable and started logging in Timelab.